NEOPRIMER EP 120SF
It is an epoxy resin-based, two-component, solvent-free, bonding bridge and penetration floor coating material that can be cured in damp concrete.
Place of Use;
- As a primer layer before the application of epoxy or polyurethane top coatings on concrete, cementitious or epoxy mortars, on floors subject to medium and heavy loads,
- As a concrete primer to wet the concrete surface and provide a good bonding bridge before epoxy mortar, epoxy self leveling screed, epoxy laminate or epoxy/polyurethane top coat coatings,
- As a binder in the preparation of level balancing, repair and correction mortar,
- As a binder in the preparation of epoxy mortar mortar with a thickness of 5 – 8 mm,
- In the repair of large cracks, in chamfering, by mixing with silica sand or with different fillings,
- As a primer for insulation systems and as a resin system in lamination construction,
- Used as a primer for different surfaces in polyurea applications.
Advantages;
- High adhesion and wetting ability, suitable for use on glossy mineral surfaces including ceramics,
- With its flexible and hard structure, it is suitable for use as insulation systems primer and lamination resin,
- Can be applied on damp concrete or curing mechanism that continues even in contact with water after application.
Packaging Information
a set of 17.50 kg NEOPRIMER EP 120SF; It consists of a net 12.50 kg of NEOPRIMER EP 120SF component A in a bucket and a net of 5 kg of NEOPRIMER EP 120SF B component in a gallon.
Did you like our product?
You can get detailed information about the product by contacting us right away!
NEOPOL KİMYA produces waterproofing systems, floor coating systems, thermal insulation systems and decorative coating products as a Kocaeli-based chemical factory with its 20 years of industry-experienced technical staff.
Business
Products
© 2023 Bondima Bilişim | Tüm Hakları Saklıdır.